Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
MRC - Anleitung Hülle / instruction hull
Markus, I have questions on a few of the parts.

Hull-009 (4x upper reinforcements) - where do they go?

Hull-010 (2x lower reinforcements) - where do they go?

Det-34 & 35, and Det-38 through Det-43 - all lights; where do they go?

TW-03c (optional top exhaust inside ring) - it goes inside the top of the tower to inset the grille a bit, yes?

On page 5 of the Tower parts are eight little orange things, obviously meant to be doubled, with no part number and not shown in your build sequence that I can see. Where do they go?
Zitieren
The reinforcement parts 009 and 010 are to link the inner reinforcement ribs of the MRC.
You can see the left half of the parts on the picture. They are used on both sides.
Part 009 links the top ribs with the side ribs.
Part 010 links the side ribs with the botom rim.

   

The big lights are left to Your own usage. They can be attached to any thinkable part for illumination of the landscape around the MRC. They are optional and have no defined place. I left them out.

Yes, the tower inside ring sets the grill a bit down inside the tower.
You have to cut out the grill of the tower top and throw it away using the separate grill with the light grey circles instead.

The 8 little parts are to be put at the tower top (tower sheet 4) onto the lines of same shape.
These are the hatches of the rain protector shields.
Bemalte Minis 2013: 39 • 2014: 23 • 2015: 58 • 2016: 44 • 2017: 104 • 2018: 5 • 2019: 122 • 2020: 140 • 2021: 52 • 2022: 231 • 2023: 49...
Zitieren
(30.04.2011, 02:36)Niceyard schrieb: The reinforcement parts 009 and 010 are to link the inner reinforcement ribs of the MRC.
You can see the left half of the parts on the picture. They are used on both sides.
Part 009 links the top ribs with the side ribs.
Part 010 links the side ribs with the botom rim.
I don't need them, then: the top is one piece.
(30.04.2011, 02:36)Niceyard schrieb: The big lights are left to Your own usage. They can be attached to any thinkable part for illumination of the landscape around the MRC. They are optional and have no defined place. I left them out.
Good to know; thank you.
(30.04.2011, 02:36)Niceyard schrieb: Yes, the tower inside ring sets the grill a bit down inside the tower.
You have to cut out the grill of the tower top and throw it away using the separate grill with the light grey circles instead.
Got it.
(30.04.2011, 02:36)Niceyard schrieb: The 8 little parts are to be put at the tower top (tower sheet 4) onto the lines of same shape.
These are the hatches of the rain protector shields.
Ah, now I see; thank you again. :-)
Zitieren


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste